PRODUCTS
classification
Ultrasonic Flowmeter iTPFlow 200
iTPFlow 200 measures the gas velocity by measuring the time difference of ultrasonic pulse. The larger the difference of ultrasonic transmission time is, the faster the gas flow speed is. The fluctuation of temperature and pressure can cause the change of ultrasonic propagation velocity, but they are compensated accurately in the algorithm, so it does not affect the calculation of gas velocity.
Description
Corrosion resistant material
The sensor is made of titanium alloy casing, made of 316SS casing material, and the probe rod is coated with Teflon paint to improve its service life in high temperature, high humidity, and corrosive gas environments
Accurate measurement
Using ultrasonic time difference measurement technology, accurate measurement can be achieved when the flue gas flow rate is less than 0.5m/s.
Strong adaptability
Supports digital and analog signal output, while analog signals support range configuration to adapt to the access of various PLCs and terminals.
Integrated Flowmeter iTPFlow 200
It can measure gas temperature, flow rate, and pressure. It can be used to measure the flow of gas from pipes, flues, exhaust gases and smoke tubes.It can work stably in high temperature environments up to 175℃.
Technical Specs
Flue Gas Temp.
Theory
Pt Resistor
Range
0 … 300℃，customizable
Resolution
0.1℃
Accuracy
±0.2%FS or ±0.2℃
Pressure
Theory
Differental Pressure
Range
-100 … 100 hPa, customizable
Accuracy
±0.5 hPa
Resolution
0.1 hpa
Flowrate
Theory
Ultrasonic
Range
0 … 45m/s
Accuracy
±2% or ±0.2 m/s, whichever is larger
Resolution
0.1m/s
Resp. Time
10s
Basic Specs
IP Class
IP65
Sense Material
Titanium
Probe Material
SS316
Probe Length
0.65m，max 1.6m
Mount Size
≥0.8m
Monitor Hole Size
≥80mm
Flange Size
Φ130 mm，customizable
Op. Temp
-40 … ＋180℃
Op. Press
-100 … +100 hPa
Range
≤1 g/m3, depends on measurement secion and gas temp.
Analog Output
4 … 20mA
Digital Output
RS-485，9600/8/n/1，by default Modbus-RTU
Power
24 … 30V DC
Prev
上一页
Applications